Menu
Your Cart
Excellent

EaziRail Alu Aluminium Balustrade & Windbreak System

Product code: K.EZAL.DEMO.001
If you are in the trade then you will want this sample in your showroom. This specially discounted showroom sample is prepared so all you need to do is mount the sample wherever you want in your showoom, fit the glass and screw on the handrail in the pre drilled holes. **Supplied without the glass..
€90.00 Ex. VAT
Product code: K.EZAL.TM.END.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your preference. A handrail can be easily installed, the post can have a flat cap with the ..
€80.94 Ex. VAT
Product code: K.EZAL.TM.CNT.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your preference. A handrail can be easily installed, the post can have a flat cap with the glass..
€80.94 Ex. VAT
Product code: K.EZAL.TM.90E.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Suitable for use on an external corner as outlined on the picture. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your preference...
€80.94 Ex. VAT
Product code: K.EZAL.TM.90I.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Suitable for use on an external corner as outlined on the picture. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your preference. ..
€80.94 Ex. VAT
Product code: K.EZAL.SM.ENDL.AN
Pre fabricated side mounted balustrade post that is suitable for 10mm - 13.52mm thick glass. This post is suitable for the left hand side of an installation as looked at from inside the balcony. Extremely fast and simple to install. These posts can be finished on top in three diff..
€82.91 Ex. VAT
Product code: K.EZAL.SM.ENDR.AN
Pre fabricated side mounted balustrade post that is suitable for 10mm - 13.52mm thick glass. This post is suitable for the right hand side of an installation as looked at from inside the balcony. Extremely fast and simple to install. These posts can be finished on top in three dif..
€82.91 Ex. VAT
Product code: K.EZAL.SM.CNT.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your preference. A handrail can be easily installed, the post can have a flat cap with the glas..
€90.81 Ex. VAT
Product code: K.EZAL.SM.90E.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Suitable for use on an external corner as outlined on the picture. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your preference. ..
€130.29 Ex. VAT
Product code: K.EZAL.SM.90I.AN
Pre fabricated balustrade post that is suitable for 10mm - 13.52mm thick glass. Suitable for installation on an internal corner as outlined on the picture. Extremely fast and simple to install. These posts can be finished on top in three different ways depending on your prefere..
€130.29 Ex. VAT
Product code: K.EZAL.HR.002.AN
This easy to install optional handrail system can be used in two ways. 1. where there is a gap between it and the glass underneath or 2. Where the glass slots up into the base channel creating a better windbreak. It is supplied in two parts, the base profile that is easily fixed to the ..
€47.38 Ex. VAT
Product code: K.EZAL.HR.001.AN
This easy to install optional handrail system can be used in two ways. 1. where there is a gap between it and the glass underneath or 2. Where the lass slots up into the bas channel creating a better windbreak. It is supplied in two parts, the base profile that is easily fixed to the po..
€47.38 Ex. VAT
Product code: K.EZAL.AC.004.AN
This slotted post cap is used on a 90 degree post where the glass is higher than the post top...
€3.95 Ex. VAT
Product code: K.EZAL.AC.002.AN
This slotted post cap is used on a centre post where the glass is higher than the post top...
€3.95 Ex. VAT
Product code: K.EZAL.AC.001.AN
Universal cover cap that can be used with any post type once the glass is below the post top...
€4.74 Ex. VAT
Product code: K.EZAL.AC.003.AN
This slotted post cap is used on an end post where the glass is higher than the post top...
€3.95 Ex. VAT
Product code: K.EZAL.EPDM.010.1100
Different thickness glass gasket sets for each slot in the post. For example a 90 degree or centre posts will require two sets whereas an end post will only require one set. The set consists of one fixed gasket and one wedge gasket 1100mm long...
€3.95 Ex. VAT
Product code: K.EZAL.EPDM.115.1100
Different thickness glass gasket sets for each slot in the post. For example a 90 degree or centre posts will require two sets whereas an end post will only require one set. The set consists of one fixed gasket and one wedge gasket 1100mm long...
€3.95 Ex. VAT
Product code: K.EZAL.EPDM.012.1100
Different thickness glass gasket sets for each slot in the post. For example a 90 degree or centre posts will require two sets whereas an end post will only require one set. The set consists of one fixed gasket and one wedge gasket 1100mm long...
€3.95 Ex. VAT
Product code: K.EZAL.EPDM.013.1100
Different thickness glass gasket sets for each slot in the post. For example a 90 degree or centre posts will require two sets whereas an end post will only require one set. The set consists of one fixed gasket and one wedge gasket 1100mm long...
€3.95 Ex. VAT
Product code: K.EZAL.AC.005.AN
This wall adapter only needs to be used if you wish to stand the post off the substrate or if you are using either type side mounted corner post it must be used behing a centre or end post so that they align. 15mm thick and 40mm diameter...
€3.95 Ex. VAT
Product code: K.EZAL.AC.006.AN
Optional covercap for side mounted post fixings...
€7.90 Ex. VAT
Product code: K.EZAL.HR.003.AN
A push in endcap to matct the above handrail system. Easily installed for that finished look in seconds...
€5.93 Ex. VAT
Product code: K.EZAL.HR.004.AN
A straight joiner for joining the EaziRail handrail system. Easily installed with No.12 (5.5mm) x 19mm self drilling screws...
€5.93 Ex. VAT
Product code: K.EZAL.HR.005.AN
A 90 degree joiner for joining the EaziRail handrail system. Easily installed with No.12 (5.5mm) x 19mm self drilling screws...
€5.93 Ex. VAT
Product code: K.EZAL.HR.006.AN
A variable angle horizontal joiner for joining the EaziRail handrail system. Easily installed with No.12 (5.5mm) x 19mm self drilling screws...
€11.85 Ex. VAT
Product code: K.EZAL.HR.007.AN
A variable angle vertical joiner for joining the EaziRail handrail system. Easily installed with No.12 (5.5mm) x 19mm self drilling screws...
€11.85 Ex. VAT
Product code: K.EZAL.HR.008.AN
A must have tool that will give you the accurate drilling pattern for mounting the handrail to the top of the post without the need for measuring...
€19.74 Ex. VAT
Showing 1 to 28 of 28 (1 Pages)