Product code: K.ON.10.6501.005.11
Ideal small and slim system for mounting on to the side of a parapet wall to increase the height of it up to 1100mm high and achieve suitable barrier loads of up to 0.74kn with the correct glass selection. Can also be used to fix to the side of a full height wall to act as an additional windbreak w..
€259.35 Ex. VAT
Product code: K.ON.10.6501.300.11
For use with the 6501 side mounted system. A pre formed and drilled 90 degree internal corner for quick installation
Inside side length: 153mm
Outside side length: 200mm
Maximum height: 500mm
Finished in an anodised aluminium finish, other colours and finishes available on request...
€106.35 Ex. VAT
Product code: K.ON.10.6501.350.11
For use with the 6501 side mounted system. A pre formed and drilled 90 degree external/outside corner for quick installation
Inside side length: 153mm
Outside side length: 200mm
Maximum height: 500mm
Finished in an anodised aluminium finish, other colours and finishes available on request..
€106.35 Ex. VAT
Product code: K.ON.10.6501.205.11
Suitable for use with the 6501 side mounted profile. Used to cover all fixing holes.
84 x 48mm
Finished in an anodised aluminium finish, other colours and finishes available on request...
€101.16 Ex. VAT
Product code: K.ON.90.7001.440.31
Suitable for use with the 6500 & 6501 profiles
4mm in diameter and 40mm long connecting pins for the easy alignment and installation of the main profile.
Supplied in packs of 8
2 required per joint...
€10.95 Ex. VAT
Product code: K.ON.10.6501.400.11
For use with the 6501 side mounted profile when there is no side cladding in use
Finished in an anodised aluminium finish, other colours and finishes available on request...
€21.42 Ex. VAT
Product code: K.ON.10.6501.450.11
For use with the 6501 side mounted profile when there is no side cladding in use
Finished in an anodised aluminium finish, other colours and finishes available on request...
€21.42 Ex. VAT
Product code: K.ON.10.6501.410.11
For use with the 6501 side mounted profile when the side cladding is also being used
Finished in an anodised aluminium finish, other colours and finishes available on request...
€23.44 Ex. VAT
Product code: K.ON.10.6501.460.11
For use with the 6501 side mounted profile when the side cladding is also being used
Finished in an anodised aluminium finish, other colours and finishes available on request...
€23.44 Ex. VAT
Product code: B0012
VistaLevel enables the quick horizontal positioning of glass panes. Fasten the little helper in a way that you can keep an eye on it during installation.
The proven vacuum technology of the VistaLevel® suction pad holds it safely in place. Now you have both hands free to comfortably align the ..
€54.18 Ex. VAT
Product code: K.ON.90.0100.110.00
The Flex Fit tool allows you to easily fit the flex fit clamps to the profile.
This tool allows you to adjust/plumb the glass easily from one side without marking or damaging the main profile...
€33.99 Ex. VAT
Product code: K.ON.90.0100.100.00
The combi tool is generally used for installing the fixed wedges once the glass is plumbed.
It it is also used to smoothly install the rubber gaskets without the need to continually bend down making the installation faster and neater...
€147.96 Ex. VAT
Product code: K.ON.90.7012.012.10
This is a must have installation item for any installer.
This is a stepped wedge/shim that starts at 1mm and goes in steps up to 6.5mm thick.
Ideal for plumbing frameless balustrade tracks before glass installation to enable easier and faster glass installation and plumbing especially on single si..
€34.46 Ex. VAT
Showing 1 to 13 of 13 (1 Pages)