Product code: KCV090.SE.SS
A prefabricated 90° corner supplied to reduce the amount of cutting needed on sites. On a standard balcony with 90° corners the installer only needs to make straight cuts...
€136.45 Ex. VAT
Product code: KCV001
This is the main section that holds the glass.
It is pre-drilled at 100mm from the ends and then 200mm thereafter.
The hole is to suit a 12mm fixing bolt and is counter bored to sink the bolt head. Drilled through both walls to allow a socket through...
€391.64 Ex. VAT
Product code: KCV004
The side cladding holds the gasket in place and is pressed onto the channel at the end of the installation.
It covers the clamps and screws from view and prevents debris from entering the channel...
€52.23 Ex. VAT
Product code: KCV005
Suitable for use where the main channel is side mounted.
This cladding finishes the bottom of the channel giving it a completed look.
Supplied in 3 metre lengths...
€55.49 Ex. VAT
Product code: KCV007L
Stainless steel end caps cut to suit the side mounted channel when used with the bottom cladding.
An adhesive will need to be used to hold them in place.
Due to the design, these are available in right and left hand models...
€12.24 Ex. VAT
Product code: KCV007R
Stainless steel end caps cut to suit the side mounted channel when used with the bottom cladding.
An adhesive will need to be used to hold them in place.
Due to the design, these are available in right and left hand models...
€12.24 Ex. VAT