Product code: K.ON.90.0502.332.00
Suitable for use with the 3kN Systems and 1.5kN 3031 Side System.
For use with a glass thickness of 31.52mm.
The flex fit system allows for the plumbing of each individual glass panel up to 34mm in relation to the perpendicular.
It allows for installation and plumbing of the glass from ..
€72.18 Ex. VAT
Product code: K.ON.90.7001.640.31
40mm long connecting pins for the easy alignment and installation of the main profile.
2 required per joint...
€12.10 Ex. VAT
Product code: K.ON.90.0100.110.00
The Flex Fit tool allows you to easily fit the flex fit clamps to the profile.
This tool allows you to adjust/plumb the glass easily from one side without marking or damaging the main profile...
€33.99 Ex. VAT
Product code: K.ON.90.0100.100.00
The combi tool is generally used for installing the fixed wedges once the glass is plumbed.
It it is also used to smoothly install the rubber gaskets without the need to continually bend down making the installation faster and neater...
€147.96 Ex. VAT
Product code: K.ON.90.7012.012.10
This is a must have installation item for any installer.
This is a stepped wedge/shim that starts at 1mm and goes in steps up to 6.5mm thick.
Ideal for plumbing frameless balustrade tracks before glass installation to enable easier and faster glass installation and plumbing especially on single si..
€28.71 Ex. VAT
Product code: KCV007L
Stainless steel end caps cut to suit the side mounted channel when used with the bottom cladding.
An adhesive will need to be used to hold them in place.
Due to the design, these are available in right and left hand models...
€12.24 Ex. VAT
Product code: KCV007R
Stainless steel end caps cut to suit the side mounted channel when used with the bottom cladding.
An adhesive will need to be used to hold them in place.
Due to the design, these are available in right and left hand models...
€12.24 Ex. VAT